Logout Confirmation

Are you sure want to logout from the system?

Yes No


Arc Flash Electrical Safety Awareness Mini-Bundle (AFES 2018) - ONL100MB

Course Number
ONL100MB
Price
245.00
Overview
Arc Flash Electrical Safety Awareness Mini-Bundle (AFES 2018) - ONL100MB

This course is comprised of five of the ten Modules in the Arc Flash Electrical Safety with NFPA 70E® 2018 Edition Complete Course Series, and are identified within the Mini-Bundle as:


Module 1: Introduction to the Arc Flash Hazard   (ONL103MB)
An introduction to the Arc Flash hazard, its causes, the risk of potential injury, and injury prevention methods for the employer and worker, and promoting a safe work environment for the qualified and unqualified worker based on the requirements of the NFPA 70E.

Module 2: NFPA 70E & OSHA Qualified Person Requirements   (ONL104MB)
An overview of the NFPA 70E & OSHA Safety-related training requirements for the Qualified person, and requirements for electrical safe work practices.

Module 3: Establishing an Electrically Safe Work Condition (LOTO)   (ONL107MB)
The requirement to establish and adhere to an Electrical Safety Program, and the responsibilities of both the employer and employees to maintain a safe work environment.

Module 4: Personal Protective Equipment (PPE)   (ONL108MB)
An overview of Personal Protective Equipment, its required use and maintenance, and the employer's responsibilities for protecting the employee as defined in OSHA 29 CFR 1910 (Code of Federal Regulations) and industry standards.

Module 5: The Energized Electrical Work Permit   (ONL109MB)
An explanation of the Energized Electrical Work Permit, the variables an employer must consider when justifying work on energized equipment, and the requirements for performing permitted work on circuits and conductors that are energized or may become energized.

Objective

 

Module 1: Introduction to Arc Flash
Upon completion of this course, you will be able to:

  1. Accurately describe the history of arc flash in the NFPA 70E
  2. Define what an Arc Flash is and the risks associated with the hazard
  3. Identify the common causes of an arc flash
  4. Describe the safety components of arc flash hazard injury prevention

 

Module 2: NFPA & OSHA Qualified Person Requirements
Upon completion of this course, you will be able to:

  1. Define the qualified person according to OSHA & NFPA 70E
  2. Identify the training requirements for the qualified person
  3. State documentation requirements for the qualified person
  4. Discuss responsibilities of the qualified person

 

Module 3: Lockout/Tagout: Establishing an Electrically Safe Work Condition
Upon completion of this course, you will be able to:

  1. Define an electrically safe work condition
  2. Explain the process of establishing an electrically safe work condition
  3. Describe the process of verifying an electrically safe work condition
  4. Apply the requirements of re-energizing an electrical system
  5. Determine the responsibilities of management associated with lockout/tagout

 

Module 4: Personal Protective Equipment (PPE) Requirements
Upon completion of this course, you will be able to:

  1. Identify the resources used for determining protection from arc flash hazards
  2. Choose the appropriate PPE for the known hazards
  3. Determine the in service care and use of the required PPE
  4. Recognize the training requirements associated with PPE

 

Module 5: Energized Electrical Work Permits
Upon completion of this course, you will be able to:

  1. Locate the requirements for performing energized work
  2. Recognize the elements of an energized electrical work permit
  3. Apply the requirements for working on 50 volts or greater

 

Additional Information

  • Each course module concludes with a graded test.
  • A minimum score of 80% is required to pass each module.
  • You will receive a Certificate of Completion for successfully passing each of the modules, and a Certificate of Achievement for completing the 5 Module Course.
  • You will have 120 days from the date of purchase to complete the course.


Approximate* Course Time:
Module 1:  56 minutes 
Module 2:  49 minutes
Module 3:  45 minutes
Module 4:  48 minutes
Module 5:  41 minutes
  * Test time included
 
Who will benefit:
Engineers, Technicians, Supervisors and Managers of Technicians, Safety Professionals


For more information please see the Frequently Asked Questions section of the online support documents.



Course Hours
8.00
Copyright © 2017-18 AVO Training Institute Inc. All rights reserved.
Learning Management System (LMS) is copyrighted by Copyright © 2017 Vector Solutions
108.55.262.12918: JPR-OH-WEB01